|
Post by gurnolla on Oct 29, 2018 5:49:48 GMT
First off thank you for making SIV available to the public. Once I became familiar with the menu layout I realized how powerful a tool it really is.
I use a Corsair H80i cooler (firmware v1.1.3) in the push/pull configuration. I was wondering if the corsair usb driver package needs to be installed for SIV to detect the H80i correctly?
I don't use iPOO and have removed the CL4 software for the usual reasons. I still have the usb drivers installed though. If they aren't needed I'd like to remove them as well.
Thanks in advance
Dean
|
|
|
Post by siv on Oct 29, 2018 7:58:19 GMT
I use a Corsair H80i cooler (firmware v1.1.3) I was wondering if the Corsair USB driver package needs to be installed Welcome to the forum and for the original H80i then you don't need the buggy Corsair SIUSBXP drivers to be installed. When you look at Link Devices there should be a Corsair Integrated USB Bridge which is the H80i and first Device Plug and Play ID will start HID\VID_1B1C&PID_ so it a HID device and uses the standard windows HID driver. The Corsair driver package is only needed when the first Device Plug and Play ID starts USB\VID_1B1C&PID_ which makes it a USB device. These devices are also listed in the Device Manager USB section rather than the HID section. You could also check the IDs on Link Export which will also report which devices are connected to the bridge channels. Below you should see the H80iGT is a USB device so does need the Corsair driver. Attachments:
|
|