|
|
Post by hrmgamer on Apr 28, 2019 2:23:42 GMT
Hi I've got both a regular Corsair Link Commander Pro and the '1000D' badged Corsair CLCP Commander Pro in my new rig. The CLCP appears in SIV (and hwinfo for that matter) correctly. The 1000D-CLCP appears to only have a LED channel, no temps, voltages, or fans (see attached image). If I install iCUE and run it before opening SIV/hwinfo it detects and acts as expected. I've had a bit of a look through the Corsair forums but couldn't find anyone else with this issue, so it could just be I've overlooked something obvious! Has anyone run into this before? Cheers HRMGamer.  |
|
|
|
Post by siv on Apr 28, 2019 8:13:23 GMT
Has anyone run into this before? Welcome to the forum and thank you for the report which is the very first one from an O1000D. I spotted that the device existed, but had no real idea what it is or does. I suspect it should be possible to adjust SIV to better support it once I know what it reports so please can you post the dump generated by pressing the [ 5:0 12 ] button, the Menu->Tools->Configure->Link Setup panel and also screen shots of what iCUE reports? Once I see these I will adjust SIV and release a 5.39 beta, are you happy to test the beta for me? What does HWiNFO report for the O1000D? After pondering this then I think it would be helpful to know what SIV get's back from the O1000D so please do SIV64X -DBGAIO -SAVE=[initial][link-status][link-dump][link-setup]=SIV_DBGOUT.txt > SIV_DBGOUT.log | more and post SIV_DBGOUT.log + SIV_DBGOUT.txt. |
|
|
|
Post by hrmgamer on Apr 28, 2019 21:46:34 GMT
Has anyone run into this before? Welcome to the forum and thank you for the report which is the very first one from an O1000D. I spotted that the device existed, but had no real idea what it is or does. I suspect it should be possible to adjust SIV to better support it once I know what it reports so please can you post the dump generated by pressing the [ 5:0 12 ] button, the Menu->Tools->Configure->Link Setup panel and also screen shots of what iCUE reports? Once I see these I will adjust SIV and release a 5.39 beta, are you happy to test the beta for me? What does HWiNFO report for the O1000D? After pondering this then I think it would be helpful to know what SIV get's back from the O1000D so please do SIV64X -DBGAIO -SAVE=[initial][link-status][link-dump][link-setup]=SIV_DBGOUT.txt > SIV_DBGOUT.log | more and post SIV_DBGOUT.log + SIV_DBGOUT.txt. Thanks for this! I've stuck the screenshots on: imgur.com/a/0AMdpvQSIV_DBGOUT_20190429a.log: pastebin.com/eciXSdtBsiv_dbgout_20190429a: pastebin.com/E5fsiHd4I had a quick look and it seemed ok, but let me know if the formatting is too mangled on pastebin. I believe the '1000D' is a modified CLCP where one of the channels has the chassis lighting (and I think it doesn't matter which of the two you plug into). I believe the chassis lighting consists of two LED strings (it's been a while since I looked, and I'd have to rip my loop out to check) presented as one device with a female coupling at the end so that '1000D' can still be configured with what iCue dubs 'lighting channels'. I currently only have the chassis lighting plugged into the '1000D'. I originally wasn't planning on stealing the CLCP out of my other machine but in the end it was the easiest way to set up my system so I have more lighting channels than I actually need. HWinfo doesn't seem to detect it at all, and yep, happy to test. That said I've never actually configured Corsair products using SIV, instead I tend to just use it as a consolidated view into system sensors. Please feel free to ask for more info, and thanks again HRMGamer |
|
|
|
Post by siv on Apr 28, 2019 23:36:24 GMT
let me know if the formatting is too mangled on pastebin. Thank you for the files and screen shots, the files were mostly OK, but contained 2.57∞C + 2.961 V which seem incorrect values and also all the °s ended up as ∞s. Were both iCUE + SIV active? If so this would explain things as Corsair fail to correctly use the Global\CorsairLinkReadWriteGuardMutex so things go slightly wonky, see siv.boards.net/thread/14/running-same-time-corsair-icue. SIV + HWiNFO should be OK as they both correctly use the locks. That said the O1000D seems much the same as a CLCP so I adjusted the SIV code. Please grab 5.39 Beta-04 or later ( Menu->File->Download->SIV Beta) and let me know how it does. You should see a O1000D that reports the same as a CLCP and a O1000S for the secondary LED port. On [ Link Setup ] can you select the O1000D for the Coolant Temperature + Coolant Pump Speed? Can you select the O1000D items onto LCD panels? There are lots of other things I should check and the easy way would be if you zipped and e-mailed me ( Menu->File->Mail SIV) the two SIV Menu->File->Save Local files, ideally generate the save files when Beta-04 has been active for >= 30 minutes. |
|
|
|
Post by hrmgamer on Apr 29, 2019 2:40:26 GMT
For continuity of the forum I have replied in detail via email, but the SIV beta appears to be behaving correctly for my given setup.
|
|
|
|
Post by siv on May 1, 2019 8:40:17 GMT
For continuity of the forum I have replied in detail via email, but the SIV beta appears to be behaving correctly for my given setup. I have just uploaded 5.59 Beta-05 which fixes a couple of cosmetic issues. There is also an O500D, do you know if this is also a re-badged CLCP please? |
|
