|
Post by andrea on Nov 9, 2018 17:34:48 GMT
Hi Ray, I've been trying the beta 20 for a few days and I'm not having problems with the H150i Pro anymore. I did not make large changes to the PC compared to last time (format etc. ..). I noticed that the pump profiles quiet / balanced / performance now all work properly, before instead it worked only balanced.. If I tried to set quiet / performance the pump rpm did not change and I had to use the PWM setting. I will keep you updated.
|
|
|
Post by siv on Nov 9, 2018 17:48:22 GMT
Hi Andrea, Welcome to the forum and I don't recall making any changes for the H150iPro since I added support in SIV 5.33.
Which version of SIV did you have issues with? In general I find it's best to use Custom and for me to sensibly comment you would need to post Link Fans.
Might CL4 or iPOO have been active? To check look at Menu->Help->Lock Handle.
|
|
|
Post by andrea on Nov 9, 2018 18:49:55 GMT
If I remember correctly it was 5.33 and 5.34. Maybe there were some drivers that have problems, which in the meantime I have updated.
|
|
|
Post by siv on Nov 9, 2018 20:17:49 GMT
I have just looked at the code and now remember I added:
Sleep( 10 ); // allow for dodgy firmware and suspect this is what made the difference, it is not need it on this system, but is on another one. I also added code to better deal with awaking after the system has been asleep. This code should not be needed, only is as the Corsair supplied SIUSBXP driver fails to correctly handle power state changes and feel Corsair should have fixed their driver a long time ago.
|
|